Old Florida roofs need old-Florida knowledge
Downtown High Springs has a genuine historic building stock — wood-frame and masonry homes, deep porches, metal roofs that have been patched more than once, and additions layered on over decades. These roofs rarely match a textbook detail. Flashings were hand-formed, pitches vary, and the framing behind the wall may not be square.
That is not a reason to avoid the work; it is a reason to inspect carefully before quoting. We look at how the roof was built, not just what is on top of it, and we explain what can be repaired and what has to be rebuilt.
Outside town, properties tend to be larger and more exposed, with barns, workshops and guest structures sharing the same wind and rain.
Roof types we see in High Springs
- Older metal roofs — 5V crimp, corrugated and standing seam — often with failing fasteners, surface rust or patched penetrations.
- Architectural and three-tab shingle on mid-century and newer homes, frequently at or past the 15–20 year mark.
- Porch and addition roofs with low slope, where water ponds and flashing details are critical.
- Outbuildings and barns with exposed-fastener panels that need fastener and washer maintenance.
River-country humidity and heavy tree cover accelerate algae, moss and fascia rot. We see more shaded, damp roof edges here than on the open west side of the county.
Not sure what your High Springs roof needs?Call and describe what you are seeing — we will give you a straight answer before anyone climbs up.
Call (352) 614-6215Permits, historic considerations and inspections
In-town roofing permits are issued by the City of High Springs; unincorporated properties fall under Alachua County. If the building is in a historic district or is a contributing structure, exterior changes may need additional review. We will flag that before ordering materials, not after.
Older homes often have decking that does not meet current thickness or attachment requirements. The inspection is where that surfaces, so we open and assess the deck during tear-off and document any required upgrades in writing.
What we do in High Springs
Our work here leans toward repair and restoration on older roofs, plus full replacement when the structure is sound but the covering is finished. We also handle metal roof repair and replacement, leak diagnosis, storm damage and fascia and gutter work.
If you are renovating a historic property, call early. Roof details are much easier to plan before the interior work starts.
Need a roofer in High Springs?Call (352) 614-6215. We will tell you what the roof needs and when we can be there.
Call (352) 614-6215Questions & answers
High Springs roofing FAQs
Local questions from homeowners in High Springs and the surrounding area.
Do you work on historic homes in High Springs?
Yes. We repair and replace roofs on older wood-frame and masonry homes, including metal roofs with non-standard details. We inspect first and explain what can be preserved.
How much does a roof replacement cost in High Springs?
Usually $11,000–$22,000 for shingle, depending on the home's size and how much decking and fascia repair is needed. Older homes often have more hidden repair than newer ones.
Can you repair my metal roof instead of replacing it?
Often, yes. Failed fasteners, washers, seams and penetrations can usually be repaired. Severely rusted or oil-canning panels may need replacement sections or a full re-roof.
Is a permit required for a roof repair?
A full re-roof always requires a permit. Small repairs may not, depending on scope and jurisdiction. We will tell you what applies to your address before starting.
Do you serve properties along the Santa Fe River?
Yes. We cover High Springs, the river corridor and surrounding Alachua County properties. Call with the address to confirm access and scheduling.
Gainesville's roofing company handles roof replacement, repair and storm response across Alachua County.